Bad cable Pleaseclick here for Sansa Clip Sport. In another mode USB mass storage. Problem solved, well, partially. both windows 7. Source
You may also... STEP 3 - Refresh the drivers 1. Feb 17, 2014 #11 mike1959 TS Evangelist Posts: 1,031 +53 Hi, Was good to read your players are working now, Windows does tend to hold on to so many USB Sometimes Windows Update will correct these issues, but only while the device is connected.
Posts: 183 Sansa Clip+ Drivers? If you can not find the right driver for your SanDisk device, enter SanDisk device model into the search box below and Search our Driver Support Database. During enumeration, the device sends Windows information about itself. I also tried this http://kb.sandisk.com/app/answers/detail/a_id/42 They do not show up in my computer or the device manager, windows media player is fully updated as well as windows 7.
All rights reserved. Additional troubleshooting notes: If you have replaced the Sansa Player and you still have problems getting it to recognize in the computer, then you may need to try some additional troubleshooting. So it does not recognize the mp3 player as being connected. Sansa Clip Not Recognized Windows 10 For Sansa Connect you can try reinstalling the firmware using the Connect Recovery Mode.
Since your Sansa fails on different computers, I think it's most like the Sansa device, itself > Fully charge the Sansa before you try connecting it again > Try connecting the It shows you how your USB devices connect to each other along with their various USB descriptors. I can't find any sites for a simple driver, looks like I am **** out of luck without a install cd. https://kb.sandisk.com/app/answers/detail/a_id/6932/~/sansa-clip-zip-support-information-page I am no stranger to looking up drivers but this is a doozy I already spent 3 hours on it.
Portable Device (if the player is set to MTP mode) If there is a yellow exclamation point (!) or question mark (?) beside the device, try to refresh the drivers. Sansa Firmware Updater It's an old program, runs a DOS script in a new window, but it does work well. You can use Forced MSC mode or switch the player settings to MSC. Windows "recognizes" the new device through a process called "device enumeration".
Corrupted drivers 3. I also found some info about resetting the player by holding down the power button for 20 seconds, worth a try... Sansa Clip Driver Windows 10 This data is sent to the controller in data blocks called “Descriptors”. Sansa Clip Windows 10 Highest capacity memory card supported by Sansa players Details Answer ID 6932 Published 07/21/2011 10:21 AM Updated 04/21/2017 08:10 AM Was this answer helpful?
Please help us maintain a helpfull driver collection.After downloading and installing Sandisk Sansa Clip, or the driver installation manager, take a few minutes to send us a report:* Only registered users http://foxshareware.com/windows-10/driver-sansa-sandisk-clip.php Thanks! __________________ Sansa Clip+4GB+8GB OF, Creative Zen Vision : M 30GB, MEElec CC51 (Review), Sony Ericsson Xperia Mini (Review), Panasonic RP-HJE355 (Review) Asus Nexus 32GB 3G+WiFi, PS Vita WiFi, Samson SR850 Yes, my password is: Forgot your password? She thinks they are 4 gig. Sansa Fuze Software Download
Please register, and get one.Email*User Name*SendDriver*Operating System*Chosen Download Option*Direct DownloadDriver ScannerDriver Download Score:*/100Driver Installation Score:*/100Overall preformance Score:*/100Thumbs:*UpDownReasons for your score:*Would you use this site again?:*Enter Captcha:*Send Other drivers most commonly associated Use our customized search engine to search for SanDisk drivers or search our entire driver archive to find the exact driver that fits your needs. You also might try bringing the battery to life using a USB wall or car charger for a few hours before plugging it into a PC's USB port. have a peek here Windows 64 bit.
All rights reserved. Sandisk Sansa Clip Driver Windows 10 Resetting a Sansa Fuze 3. SOLUTION 3 - Refresh the driver STEP 1 - Connect the Sansa player to the PC The screen on your player should turn on, show 'Connected' and indicate the battery charging
Please try using a different cable and connecting to a different PC. Sign Up | Where to Buy | Shop SanDisk | Contact Us| English (US) English (Europe) 繁體中文 简体中文 Deutsch Español Français עברית Italiano 日本語 한국어 Nederlands Português Русский Türkçe For Sansa Clip Zip supported audio/music formats 7. Sandisk Clip Sport Windows 10 Below is a case where an Unknown Device was reported.
Does anyone have the drivers for the Clip? SOLUTION4 - Connect using MSC mode Connecting in MSC mode will help determine if there is a problem with MTP mode or with the Auto Detect mode feature of the player. Their site seems to make a lot of the cable may be 'bad', but might be worth trying another if possible. http://foxshareware.com/windows-10/driver-sansa-sandisk-8gb.php And I have tried the force methods listed in that article to no avail.
Also I remember a 'blind test' carried out by a well known audio magazine, and the best audio quality was found to be the Sansa Fuze. You also might try bringing the battery to life using a USB wall or car charger for a few hours before plugging it into a PC's USB port.Click to expand... Right-click the entry with the error mark, select Uninstall. 2. Yes No Your rating has been submitted, please tell us how we can make this answer more useful.
Right now I'm using Windows XP SP2, and I don't have the CD that I got along with the Clip+. For Windows Vista users: If the player is seen in My Computer when using MTP mode, but not showing in Windows Media Player. - Download the hotfix from http://support.microsoft.com/kb/939211. - Run References to the "software stack" refer to the USB controller and root hub drivers.) 3. But I noticed when I restarted my computer the other day all the registry files, updated before windows launched.
If not, they may be "dead" as in the battery won't take or hold a charge any more. You can get help and discuss drivers on our free driver forum.